Simple fixes to stop water pooling in your fridge
Water collecting in the refrigerator can be an unexpected issue for many users. The causes are often surprisingly simple to resolve, so you can frequently address them on your own. Here's how to ensure water doesn't accumulate in the refrigerator.
Water accumulation in the refrigerator can have various causes. If the refrigerator is functioning properly, water drains through specific channels to a container outside. However, if water remains in the refrigerator or leaks outside, this may indicate a problem with the appliance. Let’s explore the most common reasons for water accumulation in the refrigerator.
Fridge and storage
Why does water accumulate in the refrigerator? cause
There could be several reasons for water collecting in the refrigerator. The most common cause is a clogged drain. The drain, usually located on the back wall of the appliance, drains away condensed water vapour.
A clog in this small opening can lead to problems that can eventually damage the refrigerator. When the drain is blocked, water builds up inside the appliance, interfering with normal refrigerator usage and burdening its cooling system.
Another reason water collects in the refrigerator is improper usage. Opening the door too often and leaving it open for prolonged periods can lead to water accumulation. Another mistake is placing hot dishes in the refrigerator. Due to the significant temperature difference, water may appear in the fridge.
Improper closure of the refrigerator door can also lead to water collecting inside. Slightly open doors can raise the temperature inside the refrigerator, causing water to appear on the shelves. Damaged seals on the doors may also be the cause of the problem.
Ways to solve the problem on your own
If you discover that your refrigerator's drain is clogged, you don't need to call a repairman right away. There are simple methods you can apply at home. Start by preparing a thin wire or a special cleaning tool to gently remove the debris blocking the flow.
The next step is to use a solution of water and baking soda. Use a syringe to introduce the solution into the drain to dissolve any remaining debris. Rinse until the channel becomes unblocked. This method not only clears the drain but also cleans it of bacteria.
If damaged seals are the cause, they should be replaced. You can do this yourself. Start by removing the old seals. Then, clean and dry the areas around them. The next step is to install new seals. This requires no tools, as the seals are pressed into unique grooves. After installation, check if the door closes properly. If not, remove the seal and reattach it.
How to prevent water from accumulating in the refrigerator?
To avoid water accumulation in the future, it's worth implementing a few simple rules. Avoid putting hot dishes in the refrigerator – it's best to let them cool before placing them inside. Check the seals on the doors, as they can become damaged over time, causing the refrigerator door not to seal properly. When using the appliance, make sure the door is closed correctly. Remember not to place too many items in the refrigerator. An excessive amount limits the cooling air movement and can lead to uneven cooling issues.
